Garmin Descent X10 · Essential dive computer
Clear dive data at a glance.
A large backlit display, dedicated dive modes and NDL Aware insights for your underwater world.
Our Take
Keep the details of your next dive right in view. The Descent X10 combines a large, always-on display, straightforward four-button control and NDL Aware depth insights in a dedicated dive computer. Scuba, Apnea and Gauge modes support different underwater pursuits, while up to 50 hours in Dive mode adds staying power for your next trip. Automatic Garmin Dive logging, a surface-based simulator and setup sharing make it a strong choice for recreational diving and compatible backup setups.
What’s in the box
Your standard Descent X10 setupDescent X10 dive computer with hinged silicone dive band, charging/data cable, and documentation.
Optional bezel guards, replacement bands and bungee mount are sold separately. Pictured smartphone and other dive gear are not included.
Your Descent X10
Black · Hinged silicone dive band · 010-04686-00
The rectangular 2.1″ screen, four-button operation and extra-long hinged band are designed around dive use. The included band accommodates 140–360 mm, including appropriate exposure-suit fit.
Colored bezel guards shown in the visual guide are optional accessories. The computer in this listing is the standard X10, rather than a bezel-guard bundle.
Built around your dive
A 2.1″ monochrome MIP display keeps key information easy to read.
Choose Scuba, Apnea or Gauge, with the requirements for each detailed below.
See calculated changes in NDL for a 3 m / 10 ft depth change.
Rechargeable power with up to six months in standby.
Use the paired Garmin Dive app to simulate supported dive scenarios on the surface.
Rental controls, shop labels and setup sharing support dive-shop administration.
The essentials at a glance
Dedicated dive functions, with the complete limits and settings below.
| Specification | Details |
|---|---|
| Display | 2.1″ diagonal; 320 × 240; monochrome MIP with backlight |
| Dive modes | Single-gas Scuba, Apnea and Gauge |
| Gas support | Air / nitrox, 21–40% O₂; one bottom gas plus up to 11 backup gases |
| Dive rating | 100 m maximum device operating depth; 10 ATM |
| Band fit | Hinged silicone; 140–360 mm; 26 mm QuickFit compatibility |
| Battery ratings | Up to 50 hours in Dive mode; up to six months in Standby |
| Phone app | Garmin Dive on a compatible iPhone or Android phone |
| Model / warranty | 010-04686-00; one-year Garmin limited warranty in the U.S. |
For certified recreational divers using appropriate backup instruments. Device depth ratings do not extend training or breathing-gas limits. Read the use and care notes.
See how X10 fits your next dive
Original product visuals show the display, setup tools, connected logbook and optional accessories.
The sunlight-readable 2.1″ display, large text and backlight bring depth, time and supported mode data into view. Choose from Scuba, Apnea and Gauge profiles.
The housing and bezel use recycled ocean-bound plastic, and the rechargeable battery is rated for up to 50 hours in Dive mode. Pictured accessory bezel guards are sold separately.
Customize supported data layouts and share compatible dive settings between Descent computers. Review every transferred configuration before diving. Other pictured dive equipment is not included.
Sync recorded dives to Garmin Dive on a compatible paired phone, add notes and photos, track gear usage and explore shared dive-site information. Phone sold separately.
Explore the complete feature guide
Each count matches the individually named cards in that row. Custom data-field options are identified separately from the feature categories.
Dive modes & breathing gases
-
Single-gas scuba
Use the dedicated Scuba profile with a configured bottom gas. Review the selected gas and dive settings during the pre-dive check.
-
Apnea mode
Record breath-hold dives with dedicated in-dive and surface information. Apnea diving requires appropriate training and a designated buddy.
-
Gauge mode
Use depth and bottom-timer functions. Gauge mode does not provide decompression information; after a gauge dive the computer is restricted to Gauge mode for 24 hours.
-
Pool dive mode
Practice in the pool without saving the session to the dive log. Pool dive mode switches off automatically at midnight.
-
Air and nitrox support
Configure oxygen content from 21% to 40% for supported air and nitrox dives. Enter the personally verified gas analysis before use.
-
One bottom gas plus backup gases
Store one bottom gas and up to 11 additional backup gases. Garmin specifies that backup gases are not included in the decompression calculations.
-
In-dive backup-gas selection
Select a configured backup gas from the in-dive menu when required. Correct gas analysis, configuration and appropriate training remain essential.
-
Water-type setting
Select the water type used by supported dive and breathing-gas calculations.
-
Apnea discipline setting
Assign the apnea discipline so it can be reviewed with the completed dive in the log.
Live dive information
-
Current depth
Keep the current depth in view on the applicable dive screen. Follow the selected units and the device’s depth-sensor limits.
-
Current dive time
Review elapsed dive time during the activity, with mode-specific screens for Scuba, Gauge and Apnea.
-
Remaining no-decompression time
See the calculated NDL during supported Scuba dives. Gauge mode does not provide decompression information.
-
Active breathing gas
Review the configured breathing gas on the primary Scuba screen and use the in-dive menu for supported backup-gas selection.
-
Current PO₂
View the current oxygen partial-pressure information during supported Scuba dives alongside the configured alert thresholds.
-
Ascent and descent indication
Review the device’s vertical-rate indication on applicable dive screens. Available information and layout depend on the selected dive mode.
NDL, planning & decompression
-
NDL Aware depth metrics
See calculated changes in your no-decompression limit for a depth change of 3 m / 10 ft. The available fields show shallower, deeper or change-in-NDL information in supported dive modes.
-
Bühlmann ZHL-16c model
Uses the Bühlmann ZHL-16c decompression model with gradient factors for supported Scuba calculations.
-
Adjustable conservatism
Choose Low, Medium, High or a custom gradient-factor configuration. Custom factors require an understanding of decompression theory.
-
Custom gradient factors and deep stops
Garmin lists deep-stop support through custom gradient factors. These advanced settings should be configured only with appropriate knowledge and training.
-
PO₂ thresholds
Configure supported maximum-operating-depth, warning and critical oxygen-pressure thresholds. Garmin lists PO₂ support up to 1.6 bar.
-
Basic NDL dive planner
Calculate a prospective no-decompression time or maximum depth using the selected oxygen content and current or future tissue loading. Calculations are not saved or applied to the next dive.
-
Repeat-dive planning
Add repeat-dive intervals to a prospective NDL plan and account for a chosen surface interval. This is a planning calculation rather than a saved dive configuration.
-
Breathing-gas calculator
Calculate PO₂, oxygen percentage or maximum depth from the other two values. Results also depend on the selected water type.
-
Configurable safety-stop timer
Safety-stop settings offer Off, 3-minute or 5-minute options. Follow your training and Garmin’s dive instructions when planning and performing stops.
-
Decompression-stop guidance
Review required stop depth and time after the no-decompression limit is exceeded in Scuba mode. All required decompression stops must be completed.
-
Final decompression-stop setting
Configure the depth of the last decompression stop through Dive Setup. Available settings depend on the dive mode.
-
Automatic altitude adjustment
Uses surface-pressure information to account for altitude in dive calculations. Allow the device to establish appropriate surface pressure before diving, as instructed in the manual.
-
No-fly countdown
Review the remaining no-fly countdown and its end time. The Standard and 24 Hours settings calculate different values according to dive history; follow the full manual and your training.
-
Surface tissue-load reset
Acknowledge and reset residual tissue loading while on the surface. Garmin says to reset only when you do not plan to use the computer again in the near future; do not use a reset to disregard your actual dive history.
-
Tissue-load transfer
Transfer supported tissue-loading data separately between compatible devices. Review the received settings and tissue data before use.
Screens, controls & automatic timing
-
2.1-inch monochrome MIP display
Read large dive data on an always-on, sunlight-readable monochrome memory-in-pixel screen with 320 × 240 resolution.
-
Four leakproof inductive buttons
Navigate the computer with four large physical buttons designed for underwater operation.
-
Custom dive data screens
Show, hide, reorder and customize supported screens and field layouts for each dive mode. Some screens have fixed options.
-
Adjustable backlight
Set brightness and screen-timeout preferences. Garmin specifies a configurable backlight that stays on during the dive.
-
Flip-screen mode
Rotate the screen 180 degrees and reverse button functions so the buttons can sit above the display.
-
Automatic dive start and end
The computer can wake and start a dive from standby when it detects submersion. Scuba and Gauge use the end-dive timer after surfacing; an Apnea activity is stopped manually. Automatic start is disabled when the device is fully shut down.
-
Custom end-dive delay
Set the surface delay before a supported dive ends and is saved. Garmin lists a range of 20 seconds to 10 minutes.
-
Button lock
Lock the buttons to help prevent unintended presses while the control is enabled.
-
Dive stopwatch
Use a stopwatch during supported dive modes, including starting, stopping, resuming and resetting it from the in-dive menu.
Dive alerts & notifications
-
Audible alert tones
Hear supported dive alerts and alarms. Configure tones through the device and dive-alert settings.
-
Vibration alerts
Use supported vibration notifications for dive events and custom alerts. Availability follows the selected alert and sound/vibration settings.
-
Custom Scuba alerts
Set supported depth, time or vertical-speed alerts for Scuba use. Garmin lists up to 40 custom alerts per dive mode.
-
Custom Apnea alerts
Configure supported apnea alerts by depth, time or vertical speed, including ascent or descent direction where available. Garmin lists up to 40 custom alerts per dive mode.
-
Alert labels, repetition and previews
Name a supported custom alert, choose a single or repeating trigger, configure its sound/vibration and pop-up, and preview the alert before use. Options vary by alert type.
-
Ascent-rate alert
Receive a warning when the device detects its excessive-ascent condition. Alerts supplement the diver’s training and monitoring.
-
Oxygen-pressure alerts
Receive supported low-PO₂, warning and critical notifications based on the configured oxygen-pressure settings and detected dive conditions.
-
Oxygen toxicity alerts
Receive an alert for the device’s oxygen-toxicity-unit condition during a dive. Review exposure information in the surface-status tools as well.
-
NDL notifications
Receive supported notifications as the no-decompression limit approaches and when decompression is required.
-
Decompression-stop notifications
Review supported approach, ceiling, stop-completion and decompression-cleared notifications during Scuba use.
-
24-hour decompression-violation warning
Garmin specifies a 24-hour warning following a decompression violation. This is described as a warning in the product specification.
-
Safety-stop notifications
Receive supported safety-stop start, completion and ceiling-related notifications alongside the countdown timer.
-
Battery alerts
View low and critically low battery warnings during supported dive use. Check charge before diving and follow the device’s instructions.
-
Sensor and device-condition warnings
The computer reports supported depth-sensor faults and device errors. Such warnings require the response specified in the manual and use of backup instruments.
-
Silent diving setting
Deliberately disable dive-alert tones and vibrations through the advanced dive settings. This changes how alerts are presented.
Surface status & dive history
-
Surface interval
Review elapsed time since surfacing in the surface-status screens.
-
Nitrogen tissue-load status
Review the device’s calculated nitrogen loading after a recorded dive.
-
CNS oxygen exposure
View the central-nervous-system oxygen-exposure percentage within the surface-status information.
-
Oxygen toxicity units
Review accumulated OTU information after diving. The manual explains the device’s 24-hour OTU-expiration behavior.
-
Tissue-compartment status
Garmin’s surface-status tools include tissue-compartment information alongside nitrogen and oxygen-exposure data.
-
On-device dive history
Open recorded dive summaries on the computer, including overview information and additional statistics.
-
Depth graph
Review the depth profile of a completed recorded dive in the dive log.
-
Temperature graph
View a completed dive’s temperature graph from the log.
-
Dive-event timeline
Review recorded events such as reaching maximum depth or beginning a decompression stop.
-
Apnea dive review
Open individual apnea dives within a recorded activity for more detailed review.
-
QR-code PDF summary
Generate a PDF summary of a recorded dive by displaying its QR code and scanning it with a suitable phone. This is also useful before ending a rental session.
Phone connection, sharing & simulation
-
Bluetooth connectivity
Pair with compatible devices and a supported smartphone using Bluetooth.
-
iPhone and Android compatibility
Use the compatible Garmin Dive app on a supported iPhone or Android smartphone. Phone and app setup are required for connected features.
-
Garmin Dive log sync
Upload recorded dives wirelessly to Garmin Dive after the dive, with a compatible paired phone and app setup.
-
Phone-based entry and exit locations
Automatically attach supported dive entry and exit locations using the paired Garmin Dive app and the phone’s location capabilities.
-
Dive journal
Add supported environmental details, photos, notes and dive buddies to your dives in Garmin Dive.
-
Gear-usage tracking
Use Garmin Dive to follow the equipment associated with your recorded dives. Requires the compatible smartphone app.
-
Dive-site discovery and sharing
Browse dive locations, see community photos and details, and share or review supported dive-site information through Garmin Dive.
-
Dive setup sharing
Send or receive supported dive configurations through Garmin Share with nearby compatible Descent computers. Review and accept the settings before use.
-
Backup-device setup support
Use setup sharing to align supported settings across a primary and compatible backup dive computer. Each device and the diver’s actual tissue history must be configured appropriately.
-
Transferred-setup validation
The receiving computer performs a simulated dive test to check transferred settings and tissue-load data, and reports issues with the transfer.
-
Dive simulator
Practice supported Scuba, Apnea and Gauge scenarios from the Garmin Dive app while on the surface. A compatible paired smartphone is required.
-
Simulator controls
Change target depth, ascent/descent rates and the time multiplier, or pause a simulated dive through the app.
-
Separate simulated tissue loading
Simulator mode preserves a copy of actual tissue loading and restores it when simulation ends. Simulated dive logs are not saved; setting changes made during simulation are retained.
-
Simulated surface intervals
Practice successive simulated dives using a selected surface interval or cleared simulated tissue data through Garmin Dive. Actual tissue data are separate.
Rental fleet management
-
Rental mode
Configure the computer for temporary rental use with a simplified interface. Entering rental mode clears saved logs and personalized settings while maintaining paired devices.
-
Standard and Basic rental modes
Choose Standard for the full supported dive feature set, or Basic for a limited feature set intended for novice renters. Appropriate diver training is still required.
-
Allowed renter settings
In Basic rental mode, choose which dive settings the renter may access. Some administrator settings are unavailable during an active rental.
-
Administrator passcode
Protect rental administration with a four-digit administrator passcode.
-
Fleet usage information
Review device-usage information across rentals through the rental administration settings.
-
Shop name and device label
Customize the shop name and device label shown on the Ready to Rent screen to help identify fleet equipment.
-
Rental-settings transfer
Send or receive supported rental configurations between compatible computers.
-
End-rental reset options
Clear a completed rental’s saved data and either restore the prior configuration or retain its setting changes, according to the administrator’s choice. Export needed logs first.
-
Exit rental mode
Return the computer to standard operation through administrator settings. Exiting rental mode clears dive logs and settings and restores defaults.
Construction, power & everyday tools
-
100 m dive rating
Garmin rates the X10 for diving to a maximum operating depth of 100 m, with a 10 ATM rating and EN 13319-related specification. The rating does not extend the diver’s training or breathing-gas limits.
-
Depth sensor
Measures depth over 0–100 m, with metric resolution of 0.1 m to 99.9 m and 1 m at 100 m, or 1 ft in imperial display units.
-
Thermometer
Record supported water-temperature information during dives. Body temperature can influence the temperature sensor.
-
Recycled ocean-bound plastic
100% of the plastic in the housing and bezel is made with recycled ocean-bound plastics, according to Garmin.
-
Hinged silicone dive band
The included long silicone band fits wrists or exposure-suit circumferences of 140–360 mm.
-
26 mm QuickFit compatibility
Fit supported QuickFit 26 mm bands using the required pin arrangement. Optional replacement bands are sold separately.
-
Replaceable bezel guards
Add a separately sold protective bezel guard in Black, Amp Yellow, Aqua or Purple Iris. These are accessories rather than additional computer variants in this listing.
-
Optional bungee mounting
The original X10 accessory visual shows a compatible bungee-mount option. Mounting accessories are sold separately.
-
Rechargeable dive battery
Use the included charging/data cable to recharge the built-in lithium-ion battery. Garmin rates it for up to 50 hours in Dive mode.
-
Standby power saving
Conserve power in standby for up to six months. The device can wake from a button press or detected submersion; full shutdown disables automatic dive start.
-
Custom standby text
Set the text displayed on the standby screen.
-
Personal-data passcode
Set a four-digit device passcode and a required-entry interval. Garmin allows starting a dive without entering the passcode; review lockout and recovery behavior before enabling it.
-
Time and date
Set and view the time and date, time zone and supported display formats.
-
Alarm clock
Save multiple alarms with supported repeat, sound and vibration settings.
-
Countdown timers
Use quick or saved countdown timers, with optional automatic restart and sound/vibration settings.
-
Surface stopwatch
Start a stopwatch on the surface and continue it into a supported dive.
-
Language and unit settings
Set the device language and supported depth, distance and temperature units.
-
USB data modes
Select MTP or Garmin mode when connecting the computer to a supported computer.
-
Software updates
Receive supported software updates through Garmin Dive or Garmin Express, and install downloaded updates through device settings.
-
Reset and restart tools
Access settings-reset and full-data-reset options, or restart the device for troubleshooting. Export needed logs first and follow the separate restrictions for tissue resets.
Custom data-field options
Availability depends on the selected dive mode. The blank-slot option controls layout rather than adding a measurement.
-
Ascent rate
Current upward movement rate toward the surface.
-
Average depth
Average depth for the current dive.
-
Average temperature
Average temperature recorded during the dive.
-
Battery percentage
Remaining battery charge shown as a percentage.
-
Battery, time and temperature
A combined layout field for battery charge, time of day and temperature.
-
Dive number
Number of completed dives.
-
Last-dive ascent time
Time spent ascending during the previous dive.
-
Last-dive average ascent rate
Average ascent rate from the previous dive.
-
Last-dive average descent rate
Average descent rate from the previous dive.
-
Last-dive average temperature
Average temperature recorded during the previous dive.
-
Last-dive depth
Maximum depth reached during the previous dive.
-
Last-dive descent time
Time spent reaching maximum depth on the previous dive.
-
Last-dive hang time
Time spent neither ascending nor descending on the previous dive.
-
Last-dive maximum ascent rate
Highest ascent rate recorded on the previous dive.
-
Last-dive maximum descent rate
Highest descent rate recorded on the previous dive.
-
Last-dive maximum temperature
Highest temperature recorded on the previous dive.
-
Last-dive minimum temperature
Lowest temperature recorded on the previous dive.
-
Last-dive time
Total time below the surface on the previous dive.
-
Maximum depth
Greatest depth reached during the current dive.
-
Maximum temperature
Highest temperature recorded during the activity.
-
Minimum temperature
Lowest temperature recorded during the activity.
-
NDL at 3 m / 10 ft shallower
Calculated no-decompression time for a position 3 m / 10 ft above the present depth in supported modes.
-
NDL at 3 m / 10 ft deeper
Calculated no-decompression time for a position 3 m / 10 ft below the present depth in supported modes.
-
NDL change for 3 m / 10 ft
Calculated NDL change for the supported shallower or deeper depth comparison.
-
Blank data slot
Leave a customizable layout slot empty using the None field option.
-
Stopwatch field
Display stopwatch time for the current dive.
-
Surface time
Elapsed time since surfacing.
-
Temperature field
Water temperature measured by the sensor; body temperature can influence the value.
-
Time-of-day field
Current time using the configured time-zone and display settings.
-
Time of day with seconds
Current time including seconds.
-
Time to surface
Calculated ascent time including required decompression stops in supported modes.
-
Total dive time
Accumulated time below the surface during the dive activity.
-
TTS after five more minutes
Calculated time to surface after remaining at the present depth for five additional minutes in supported modes.
-
TTS change after five more minutes
Difference between the present calculated time to surface and the estimate after five more minutes at the current depth.
Connected services require a compatible phone, app setup and appropriate permissions. Data fields, alerts and settings vary by dive mode. Review the current manual and verify the device’s settings before diving.
Full specifications, limits & care
Details for the standard U.S. Descent X10, model 010-04686-00.
Size, materials, display & storage
| Specification | Details |
|---|---|
| Strap material | Black hinged silicone dive band |
| Lens material | Chemically strengthened glass |
| Bezel material | Fiber-reinforced ocean-bound plastic |
| Case material | Fiber-reinforced ocean-bound plastic; Garmin states that 100% of the plastic in the housing and bezel is recycled ocean-bound plastic |
| QuickFit® watch band compatible | 26 mm QuickFit compatibility; optional replacement bands sold separately |
| Physical size | 56.4 × 72.2 × 20.2 mm; included silicone band fits 140–360 mm |
| Weight | 90 g without bands; 130 g with bands |
| Leakproof inductive buttons | Four large, metal leakproof inductive buttons |
| Display Size | 2.1″ diagonal |
| Display resolution | 320 × 240 pixels |
| Battery type | Built-in rechargeable lithium-ion |
| Battery life | Up to 50 hours in Dive mode; up to six months in Standby mode |
| Charging method | Garmin proprietary charging port and included charging/data cable; connect to a compatible USB-C power source or AC adapter rated at least 5 W |
| Memory/History | 120 MB |
Operating limits, depth sensor & connectivity
| Specification | Details |
|---|---|
| Display type | Always-on, sunlight-readable monochrome MIP; configurable backlight |
| Dive rating / maximum operating depth | Dive: 100 m (328 ft); 10 ATM. Garmin lists Dive (EN 13319) and states that the device is designed to comply with CSN EN 13319. |
| Depth-sensor range | 0–100 m (0–328 ft), specified as complying with EN 13319 |
| Depth resolution | 0.1 m through 99.9 m, then 1 m at 100 m; imperial resolution 1 ft |
| Operating and storage temperature | −4–113°F (−20–45°C) |
| Underwater operating temperature | 32–104°F (0–40°C) |
| Charging temperature | 32–113°F (0–45°C) |
| Wireless frequency / transmit power | 2,400–2,483.5 MHz; less than 13 dBm |
| Sensors | Depth sensor and thermometer; automatic altitude adjustment for supported dive calculations |
| Wireless / phone connection | Bluetooth; compatible iPhone or Android smartphone with Garmin Dive for connected services |
| Connected location | Dive entry and exit location saving requires the compatible paired Garmin Dive app and phone location capability |
| Inspection interval | Inspect components for damage before each use; replace damaged parts as needed |
| Manufacturer warranty | One-year Garmin limited warranty in the U.S., subject to Garmin’s consumer warranty terms |
Dive modes, gas limits & behavior
| Specification | Details |
|---|---|
| Dive profiles | Single-gas Scuba, Apnea and Gauge; Pool dive mode does not save logs |
| Decompression model | Bühlmann ZHL-16c with gradient factors |
| Gas composition | Air / nitrox, 21–40% O₂ |
| Configured gases | One bottom gas and up to 11 backup gases; backup gases are not included in decompression calculations |
| PO₂ | Supported thresholds up to 1.6 bar |
| Conservatism | Low, Medium, High or custom gradient factors |
| Safety stop | Off, 3-minute or 5-minute configuration; follow the manual and diver training for actual stops |
| Deep stops / final deco stop | Deep-stop support through custom gradient factors; configurable final decompression-stop depth |
| End-dive delay | 20 seconds to 10 minutes |
| Custom alerts | Up to 40 per dive mode; available depth, time and vertical-speed settings vary by alert type |
| Missed decompression | 24-hour decompression-violation warning, as stated in Garmin’s product table |
| Gauge-mode restriction | After a Gauge dive, only Gauge mode can be used for 24 hours |
| Surface information | Surface interval, no-fly countdown, nitrogen loading, CNS, OTU and tissue-compartment status |
| NDL planning | Basic NDL and gas calculations; calculated plans are not saved or applied automatically to the next dive |
| Power-state behavior | Automatic start works from standby; it is disabled by full shutdown |
| Simulator behavior | Requires the paired Garmin Dive app; simulated logs are not saved, actual tissue loading is restored afterward, and setting changes are retained |
| Rental setup | Standard / Basic modes, administrator passcode, allowed renter settings, usage information, shop/device labels and rental-settings transfer |
Battery modes & charging conditions
| Mode | Up to |
|---|---|
| Dive mode | Up to 50 hours |
| Standby mode | Up to six months |
Garmin states that actual battery life depends on the device mode. These are up-to ratings, not a guaranteed duration for every use. Standby and full shutdown behave differently: standby allows automatic wake for a dive, while full shutdown disables automatic dive start. Charge only within the specified temperature range and thoroughly dry the charging contacts first.
Important use, rental handling & care
For certified recreational divers. Garmin instructs users to use backup instruments and not rely on this as a sole dive computer. It is not intended for commercial or professional dive activities. Follow the supplied manual, your training and your actual dive history, including correct gas settings and all required stops.
Garmin instructs users to power the device on manually and allow at least 10 minutes before a dive, particularly after travel, so surface-pressure information can settle. The automatic-start feature is not a substitute for the pre-dive checks.
Inspect the computer and band before each use. Rinse with fresh water after salt water or chlorine exposure, avoid high-pressure washing, and let the device and charging contacts dry completely before connecting the cable. Use the specified operating, underwater and charging temperature ranges.
Rental changes, tissue resets and tissue transfers must follow Garmin’s instructions. Keep the computer’s data appropriate to its current diver, and export needed logs before administrator operations that clear data.
Color, Model Number & UPC
Exact identifiers for the standard U.S. computer in this listing.
| Color / included band | Garmin MPN | UPC |
|---|---|---|
| Black · Hinged silicone dive band | 010-04686-00 | 753759388690 |