Wahoo Run-Gym Pack for iPhone

Compatible with iPhone 3G, 3GS, 4, 4S, iPod touch, iPad
NOTE: Does not work with the iPHONE 5
Part#: WFFISICAHR

In The Box

• Wahoo Key
• Wahoo Fitness Soft Heart Rate Belt

Features:

• Very low power usage - no internal battery
• Compact yet rugged - similar size to iPhone charging plug
• Fits into 30-pin connector
• Sends and receives signals up to 10 feet (unobstructed)
• Wireless ANT+ AP2 ultra low power technology license free, 2.4 GHz ISM band operation
• Weight 3.5 g (0.12 oz.)

Combining all that you need to run, the run pack features the Wahoo Key and the Wahoo Fitness soft heart rate belt in a convenient bundle.



Wahoo Fitness wirelessly connects your iPhone 3G, iPhone 3GS, iPhone 4 or iPhone 4S to your favorite fitness measuring devices, including your heart rate sensor. With the Wahoo Key, your phone, your favorite playlists, the best fitness Apps and real-time activity information are all in the palm of your hand... or strapped to your arm!

How do I use the Heart Rate Monitor?
Thoroughly wet both electrodes on the Strap with water or electrode gel. It is important that the electrodes are sufficiently moist so that a good skin-toelectrode connection is made.

Snap one end of the Strap to one side of the Pod. Either end of the Strap can connect to either end of the Pod, but the Pod should have the Wahoo Fitness logo facing up when in use.

Wrap the Strap around your back and snap the free end to the free side of the Pod so that the Pod is located on your breastplate, just below your breasts. Adjust the Strap to create a snug, yet comfortable fit. Once in place, move within 5’ - 10’ of any device that receives ANT+ wireless data.

It won't connect! What do I do?
If you do not get a reading, or the readings are erroneous, ensure that the electrodes are wet, have good contact with your skin and the that your Heart Rate Sensor is sufficiently snug. Your Heart Rate Sensor ‘sleeps’ with inactivity and ‘awakens’ with good electical contact. A brief physical warm up may be required.

How do I pair it with my device?
Each Sensor has a unique identification code and can be uniquely paried with a display device or reader so that it will always be recognized when it is activated and within range. Since each reader is unique, you should reference the instructions of your reader for pairing techniques.

How do I change the Heart Rate Monitor battery?
The battery is located behind a cover on the back of your Heart Rate Sensor Pod and can be replaced by placing a coin in the slot and turning the cover 1/4 turn counterclockwise. Replace with a 3 volt CR2032 battery (contact a local waste handling group for proper disposal of old battery).