Features:
One button fully automatic operation

Professional accuracy at home

Easy to read large digital display - 16mm digital display makes this monitor easy to read

Simultaneous readout of systolic and diastolic pressure, and pulse.

Clinically Validated - according to the Association for Advancement of Medical Instrumentation and British Hypertension Society protocols

To obtain an accurate reading, it is important to use the correct cuff size. A cuff that is too small will result in a higher than expected reading and a cuff that is too large will result in a lower than expected reading.

Specifications:
Display: Digital: 16mm character height Pressure and pulse displayed simultaneously
Pressurization: Automatic, using micro pump
Deflation: Automatic exhaust
Battery Life: Approx. four months with one daily measurement

Standard specifications for all digital models

Type: Oscillometric
Accuracy: Pressure: ±3mmHg or 2%, whichever is greater/Pulse: ±5%
Pressure Range: 20mmHg to 280mmHg/Pulse: 40 to 200 pulses/minute
Power Source: Four type AA alkaline batteries (1.5 volt) except UB-322, which uses two type AAA batteries. Batteries not included.
Operating Environ: 50°F to 104°F (10°C to 40°C)
Storage Environ: 14°F to 140°F (-10°C to 60°C)
Blood pressure measurements determined with this device are equivalent to those obtained by a trained observer using the cuff/stethoscope auscultation method within the limits prescribed by the American National Standards Institute (ANSI/AAMI SP10) for electronic sphygmomanometers. Manufactured by an ISO 9000 and ISO 13485 registered company.